Skip to content

The Revised ESRS is now official. What you need to know and how to act

The Revised European Sustainability Reporting Standards have entered into force on 10 November 2026. The standards cut mandatory datapoints by more than 60%, but they also raise the bar for focus and quality. Here is what has changed, and what to do now.

On 21 September 2026, the Revised ESRS were published in the EU’s Official Journal as Delegated Regulation (EU) 2026/1563. They entered into force on 10 November 2026 and become mandatory for financial years starting on or after 1 January 2027, with the first reports due in 2028.

Robin Kålås, Sustainability Manager at Position Green
On-demand webinar

Want the full picture? Hear Robin Kålås and our reporting experts walk through the final Revised ESRS

Watch the webinar

For financial year 2026, companies in scope can choose between three options: the original ESRS, the original ESRS combined with eight specific reliefs taken from the Revised ESRS, or the Revised ESRS in full.

Key dateWhat happens
21 September 2026Revised ESRS published in the Official Journal as Delegated Regulation (EU) 2026/1563
10 November 2026Revised ESRS enter into force
Financial year 2026Choose: original ESRS, original ESRS with eight reliefs, or the Revised ESRS in full
1 January 2027Mandatory for financial years starting on or after this date
2028First reports due

What you need to know

Fewer data points. The twelve standards remain, but mandatory data points are cut by more than 60%. The text shrinks from 284 to 163 pages, and the planned sector-specific standards have been dropped.

New reliefs. You can run your double materiality assessment top-down, starting from your business model and value chain. An “undue cost or effort” test means you use the information reasonably available at the reporting date. You can also rely more on estimates and proxies for value chain data.

A cap on supplier requests. You can’t ask companies in your value chain with 1,000 employees or fewer for more than the Voluntary Standard requires. Greenhouse gas data is excluded from the cap.

Material information only. You report what is material and leave out the rest. Non-material information can only be included in specific cases, and it must be clearly labelled.

Sharper expectations. Lighter doesn’t mean looser. Your report must give a fair presentation of your material impacts, risks and opportunities and show how they connect to your business model, strategy and value chain. You will also need to justify your choices more clearly to your auditor.

What you need to do

  1. Confirm your scope. After Omnibus I, the CSRD applies to EU companies with more than 1,000 employees and €450 million in net turnover. If you fall outside, the voluntary standard is a simpler way to answer customer and investor requests.
  2. Choose your option for 2026. Decide whether to use the original standards, the original standards with reliefs, or the Revised ESRS, and document the choice.
  3. Revisit your double materiality assessment. You don’t have to start over. Review it against the new rules, consider the top-down option, and record what changed.
  4. Rerun your gap analysis. A gap analysis built on the original ESRS will overstate what you need. Rebuild your data inventory around the topics that are truly material.
  5. Make every datapoint traceable. Limited assurance still applies, so you need to show where each figure comes from, how it was calculated and how it can be verified.

The Revised ESRS are a chance to focus. If you have already reported, most of your groundwork carries over. If you are new to the CSRD, you start with a leaner and clearer rulebook than anyone before you.

Talk to our ESRS experts

Want to know what the Revised ESRS mean for your company?

Talk to our ESRS experts

Read more about the Revised ESRS

Robin Kålås

Sustainability Manager

Position Green

Stay up to date with the latest ESG-trends.