Skip to content

Welcome to the next era of net zero: what SBTi’s Version 2 means for your targets

Version 1 of the Science Based Targets initiative (SBTi) Net-Zero Standard told companies how to set a net-zero target. Version 2 is about how to reach it, and how to focus effort where it matters most.

SBTi sums up the shift as moving “from ambition to action”: targets now have to connect to the decisions that actually move emissions, such as capital allocation, technology investment, procurement and supplier engagement.

In a recent Position Green webinar, Oliver Orlick, Europe Engagement Manager at SBTi, and Linn Holmer from Position Green highlighted the changes and what companies should do about them. The webinar was moderated by Julia Höglund, Managing Director, Sweden.

Linn Holmer, Senior Manager at Position Green
On-demand webinar

Want the full picture? Hear SBTi and Position Green walk through SBTi Version 2 in detail

Watch the webinar

The major changes

Version 2 gives companies more options to set targets, adds new ways to count progress, and asks for more proof that the plan is being carried out. The standard consists of six chapters. One chapter now gathers all the guidance on reducing emissions across scopes 1, 2 and 3, while a new chapter covers responsibility for the emissions a company still produces before it reaches net zero.

AreaVersion 1Version 2
Near-term target period5 to 10 yearsA fixed 5-year cycle, reviewed at the end
Base yearHistoric base years allowedMust fall 12 to 24 months before the target is set
Scope 1 and 2One combined target allowedSeparate targets for scope 1 and scope 2
Scope 1 optionsAbsolute reduction or sector intensityAbsolute reduction, intensity, and a new asset transition pathway
Scope 2 optionsAbsolute reduction or renewable electricityAbsolute reduction or the new low-carbon electricity alignment pathway
Scope 3 near-term coverageAt least 67% of scope 3 emissionsEvery category above 5% of the scope 3 inventory
Scope 3 long-term coverageAt least 90% of scope 3 emissions100% coverage required
Scope 3 optionsAbsolute reduction, economic and physical intensity, supplier and customer engagementAbsolute reduction and alignment targets: supplier/customer, volume, product use and end-of-life
Counting progressNo clear guidance on target implementationAn implementation hierarchy that also counts shared-system and sector-level action
GovernanceTransition plan not requiredCategory A companies must publish a transition plan within 15 months of validation

When you need to act

Most companies with validated targets do not need to change anything until their mandatory five-year review. Version 2 can be used from 1 February 2027 and becomes mandatory on 1 February 2028. Until then, companies can choose either version, for example to keep a historic base year or a 10-year target under Version 1.

The five-year review falls five years after a target was validated by SBTi, and companies then have six months to complete it. A target published in June 2023, for example, is reviewed between June and December 2028, after Version 2 has become mandatory. Orlick confirmed that companies can keep their existing near-term targets until then.

The five-year cycle:

  1. Ensure alignment with the extensive Version 2 criteria.
  2. Set the target, develop a transition plan, have your base year data audited and have SBTi validate it.
  3. Report progress publicly every year.
  4. At the end of the cycle, SBTi assesses progress.
  5. Renew the target within 12 to 24 months of the cycle ending and set a new base year for your next five-year cycle.

“The shorter cycle improves accountability. People who set the targets are likely to still be at the company when the deadline arrives, and leaders who sign off know what has to be done within five years.”

Oliver Orlick, SBTi

Scope 1 and 2: separate targets and new pathways

Scope 1 and scope 2 can no longer share one combined target. SBTi wants to see action in both scopes, including more action on scope 1 in near-term targets. Near-term targets are mandatory for both scopes. Long-term targets remain optional, except in the case described below.

Scope 1 has three options:

  • Absolute reduction. A linear contraction consistent with net zero by 2050 at the latest. Progress is judged at the end of the five-year cycle, so reductions do not have to happen evenly year by year.
  • Emissions intensity. For heavy-emitting sectors, such as steel, that have a sector pathway.
  • Asset transition pathway (new). For companies whose emissions depend on expensive, long-lived assets. The company submits a plan, based on a carbon budget or on milestones, showing when it will replace its assets. A company might show little change before 2030 and then invest heavily around 2040. Because of that delay, a company using this option must also set a long-term net-zero target.

Scope 2 has two options:

  • Absolute reduction. A linear pathway to net zero by 2050 at the latest.
  • Low-carbon electricity alignment (new). A target to raise the share of low-carbon electricity the company uses. This suits growing companies whose total electricity use is rising. Category A companies that expect their electricity consumption to grow by more than 20% a year must also set an absolute reduction target.

Scope 3: focus on the largest categories

Near-term scope 3 targets must now cover every category that makes up 5% or more of a company’s scope 3 inventory, instead of 67% of total scope 3 emissions. On average, around 90% of a company’s emissions sit in scope 3. SBTi wants companies to concentrate on the categories where they can make a difference within the next five years. As today’s largest categories shrink over time, other categories may cross the threshold in a later cycle.

Scope 3 targets are mandatory for Category A companies. For small Category B companies they are recommended but not required, because smaller companies often have few ways to cut scope 3 apart from changing suppliers.

Economic intensity targets are gone. Holmer pointed out that many companies have set scope 3 targets per unit of revenue. Those companies will need to choose another option under Version 2.

The target types available are:

  • Absolute reduction. Reduce emissions on a linear pathway, or reduce emission intensity using sector-specific pathways where they exist.
  • Supplier or customer alignment. Increase the share of tier 1 suppliers or customers (based on emissions or spend) that are in transition or net-zero aligned.
  • Volume alignment (new). Increase the share of purchased commodities or transport that is low-carbon or net-zero aligned. Orlick confirmed that sustainable aviation fuel will count as low-carbon transport for business travel.
  • Product use alignment (new). Increase the share of sold products with a low-carbon or net-zero aligned use phase.
  • Product end-of-life alignment (new). Increase the share of products designed for circular end-of-life solutions.

To set the target, companies identify the categories that account for 5% or more of total scope 3, note any allowed exclusions, and then pick one of three approaches:

  1. One absolute reduction target across all the material categories.
  2. One supplier or customer alignment target across all the material categories.
  3. Separate targets for each category or activity, using the options that fit it, with an overall headline ambition for scope 3. This approach allows several targets within one category.

“This update makes sense for some companies. Take a company whose purchased goods and services emissions come 80% from steel and cement. It can set specific targets for steel and for cement, and an absolute or supplier alignment target for the remaining 20%, so the whole category is covered. The standard includes a list of activities that can have their own targets, including steel, cement, plastics and several kinds of transport.”

Linn Holmer, Position Green

Holmer added that this matches how companies already break down emissions when they build transition plans.

The implementation hierarchy: four levels of action

The implementation hierarchy sets out which actions count towards a target, in order of priority. It recognises that not every company can cut emissions directly in its own value chain within five years. It applies to scope 1, 2 and 3 targets, and companies with existing Version 1 targets can already use it to show progress.

  1. Activity level. Cutting the emissions in the company’s own physical inventory, for example by improving energy efficiency, switching to lower-emission inputs, or engaging with suppliers and customers. This always comes first.
  2. Activity pool level. Once all feasible direct action is taken, a company can act on a shared system it buys from or feeds into: an electricity grid (an energy shed), a group of factories in one region making equivalent products (a factory shed), or a logistics network (a transport shed). A company paying for low-carbon shipping on a route counts here, even if its own cargo travels on a different ship.
  3. Sector level. Buying market instruments that carry a product’s low-carbon attributes from a relevant source. Orlick’s example: a company that cannot physically buy low-carbon cement from a plant with carbon capture buys cement from its nearest plant, plus certificates from the plant with carbon capture.
  4. Enabling actions. Investments that remove barriers to future decarbonisation where no option exists today. These do not count towards the target, but they are recommended and are taken into account under the best efforts framework.

Levels 1 to 3 count towards target progress. Until the GHG Protocol updates its guidance, companies must report their physical inventory and their market instruments separately. SBTi will publish more on how to do this.

Work with dependencies and become more transparent

Holmer highlighted a related new term, dependencies:

“It lets companies explain what is stopping them from cutting emissions, such as regulation, market conditions or the lack of low-carbon alternatives. I expect this to make the challenges companies face more transparent.”

Linn Holmer, Position Green

Transition plans, governance and best efforts

Category A companies must have a transition plan in place. It should be disclosed when targets are validated, with the flexibility to disclose it within 15 months after validation. This answers an old criticism of Version 1: that a company could set a target without committing to any action. At a minimum, the plan must:

  • state the targets and the emissions they cover
  • set out the actions planned to meet the near-term targets, and indicative actions for the next cycle
  • describe key assumptions or dependencies that could materially affect reaching the targets
  • be formally approved by the company’s highest governance body and reviewed at least every five years

SBTi points to the Transition Plan Taskforce disclosure framework as a reference. It will check that a plan exists and covers these points, but it will not audit each plan in detail. Companies must also adhere to any national or subnational frameworks, such as the ESRS.

The best efforts framework changes what happens when a company misses a target. A company that has taken all feasible action is no longer automatically removed from SBTi. Instead, SBTi will discuss the progress made at the end of the five-year cycle. Orlick explained that many of the levers needed to meet targets are outside a company’s control, and SBTi wants to keep its most ambitious companies on board.

A new chapter, ongoing emissions responsibility, sets out how companies should take responsibility for the emissions they still produce while working towards net zero. It drew a mixed reaction. Some civil society groups worried that it, along with the implementation hierarchy, could become a backdoor for offsetting. Companies and investors have mostly welcomed the simpler standard and the five-year cycle.

What to do now

Many companies have not yet decided how to respond. Holmer’s advice is to start early, because the target itself is not the biggest change. “It’s everything around it. It’s the governance, it’s the processes, it’s the transition plan,” she explains.

  • If you have validated targets. Find your five-year review date and check how your targets would look under Version 2. Economic intensity targets for scope 3 will need to be replaced.
  • If you are setting targets for the first time. Decide whether to use Version 1 or Version 2 before February 2028. Version 1 still allows a historic base year and a 10-year horizon. Version 2 offers more target options and the implementation hierarchy.
  • For everyone. Map the scope 3 categories that make up 5% or more of your inventory to understand your new coverage, and review your governance, annual reporting and transition plan against the new requirements.
  • If making real progress against your targets is challenging. Be open about it. Use the dependencies section of your transition plan and the best efforts framework to explain what is holding you back.

Linn Holmer

Senior Manager

Position Green

Stay up to date with the latest ESG-trends.